Christmas Sale | Up to 40% Off! Shop Now

Geissele Super 42 Braided Wire Buffer & Spring Combo, H1

SKU: GEI05-495

Out of Stock
Orders will Ship within 1 Business Day
Geissele Lifetime Warranty!
TOP ADD-ON'S
Geissele SSA (Super Semi-Automatic) AR15 / AR10 Combat Trigger

Geissele SSA (Super Semi-Automatic) AR15 / AR10 Combat Trigger

$245.00
Geissele Automatics Super Charging Handle for AR15 / 5.56 - AT3 Tactical

Geissele Automatics Super Charging Handle - Black

$105.00

Designed To Improve The Function & Reliability Of Your AR-15

The Geissele Super 42 Braided Wire Buffer & Spring Combo was designed to improve the function and reliability of your AR-15 pattern rifle. Its unique spring design uses three independent strands of wire, just like the German MG42 Machine Gun.

This concept acts as a harmonic damper and energy absorber by allowing the springs to flex separately from each other. It helps displace excess energy which decreases the chance of spring failure and assists with making your AR-15 more reliable.

15% Stronger Average Return Force

The Geissele Super 42 Spring has a decreased tendency to lose length and force over a given round count. As an added bonus, it removes the annoying spring reverberations (twang) heard and felt by the shooter through the buttstock.

The Super 42 Spring has a 15% stronger average return force than the standard buffer spring. This will assist in stripping rounds out of the magazine when operating with a dirty weapon or when using steel-case ammo.

NOTES:

  • The Super 42 is for use with Carbine length buffer tubes and is not compatible with rifle length or A5 buffer tubes/receiver extensions. We do not recommend the Super 42 with 300 Blackout subsonic ammunition, as the Super 42 Spring may be too powerful and not allow the rifle to function properly.
  • The Super 42 spring and Geissele buffer are designed to work together as a set; the spring will not fit over a standard buffer. If installed with standard buffer, damage to the rifle or receiver extension will occur.

Features:

  • Spring constructed out of 3 independent strands of wire
  • Acts as harmonic dampener and energy absorber
  • 15% stronger average return force than a stock spring

Specifications:

  • Width: 1.5000″
  • Length: 11.7000″
  • Height: 1.4000″
  • Weight 0.4500 lbs
  • Material: Steel
  • Series: Buffer Spring and Buffer Combo

The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.

If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.

Geissele Limited Lifetime Warranty

  • Geissele Automatics warrants its firearms, components, and tools against defects in materials and workmanship during the lifetime of the product.
  • Geissele Automatics does not warrant against normal wear and tear, items consumed or expended by their normal use (including springs, pins, etc.), product misuse (including criminal misuse, negligence or use under the influence of drugs or alcohol), accidental damage, or damage caused by improper handling, unapproved modifications to the product, defective or improper ammunition, or corrosion.
  • Defective accessories (e.g., scopes, suppressors, flash hiders, sights, slings, parts with glass or electronic components, etc.) may be warranted by their original manufacturers but are not covered by this warranty.

If you submit a valid claim under this Limited Lifetime Warranty, Geissele Automatics will authorize your return of the product and, at its sole discretion, will:

  1. Repair the product, including replacement of defective parts with new or refurbished parts
  2. Replace the product with a product of equal or greater value.

If Geissele Automatics decides to replace a product under this warranty, Geissele will keep the product being replaced.

You must satisfy all terms and restrictions set forth in this Limited Lifetime Warranty and obtain a Return Material Authorization before shipping any product to Geissele Automatics.

Before shipping any product to Geissele Automatics, please ensure the following:

  1. The product has not been modified, is clean and any accessories have been removed (unless otherwise instructed by a Geissele Automatics technical support agent)
  2. There is no ammunition in any product or packaging
  3. The completed Return Material Authorization form has been placed inside the packaging
  4. The Return Material Authorization number has been clearly written on the outside of the packaging.

Any failure to follow these instructions could result in your package being refused and returned to you without repairs at your expense.

To obtain service, contact Geissele Automatics at sales@geissele.com or 610-272-2060.

Disclaimer: Manufacturer’s warranty is subject to change without prior notice.

Questions & Answers

Don't see the answer
you're looking for?

Loading questions...