Black Friday Week is Here | Shop Now

Dead Air Key-Micro Mount Legacy Adapter

SKU: DAADA452

Out of Stock
Orders will Ship within 1 Business Day
Backed by the Dead Air Warranty!
TOP ADD-ON'S
Dead Air Armament Keymount Micro Brake - .308 Win/7.62mm – 5/8×24

Dead Air Armament Keymount Micro Brake - .308 Win/7.62mm – 5/8×24

$79.95
Dead Air Armament Keymount Muzzle Brake - .223/5.56 NATO - 1/2×28

Dead Air Armament Keymount AR 15 Micro Brake - .223/5.56 NATO - 1/2×28

$79.95

Mount Non-Dead Air Suppressors using Dead Air’s Proven KeyMicro System

Dead Air’s KeyMicro Legacy Adapter enables users to mount suppressors from brands like Rugged, SilencerCo, and more utilizing their established KeyMicro muzzle device interface. Simply replace your existing fixed mount or booster housing with this adapter to convert common 1.375×24 threaded suppressors over to Dead Air’s hassle-free KeyMicro quick detach system.

Constructed from durable 17-4 stainless steel with a wear and corrosion-resistant black nitride finish. Allows tool-less mounting and wiggle-free lockup when attaching to KeyMicro muzzle devices. Experience the speed and versatility of Dead Air’s KeyMicro mount. Open up new host firearm compatibility for your existing suppressor collection with the KeyMicro Legacy Adapter.

Note: Intended for non-Dead Air P-Series Suppressors. Compatible with products from Rugged, Silencer Co, Etc. 

KeyMicro Adapter

Specifications

  • Brand: Dead Air Armament
  • Model: Key-Micro Mount Legacy Adapter
  • MPN: DA452
  • Material: 17-4 Stainless Steel
  • Finish: Black Nitride

 

The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.

If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.

Dead Air Armament Warranty

We provide a lifetime warranty against all manufacturing defects and damages caused by the normal use of this product. The manufacturer will repair or replace free of charge any suppressor manufactured by, or at the direction of, Sound Moderation Technologies. The product is sold “as is” with no further implied contractual rights or warranties beyond those expressly stated herein.

The warranty does not apply to certain conditions or acts. It is at the sole discretion and determination of Sound Moderation Technologies if a particular defect or condition is covered by this warranty.

Conditions not covered include, but are not limited to: modifications, abuse, neglect, use of defective ammunition, use of improperly sized ammunition, and criminal conduct.

Sound Moderation Technologies assumes no liability for damages or bodily injury caused by such acts or omissions as previously described. Abuse and neglect are defined as usage outside of the reasonable scope for which the product is intended, thus contributing to the accelerated and unreasonable premature wear of the suppressor itself.

To submit a warranty claim please submit the online form here and have the below ready

• Your Product In-hand
• A photo of your ID
• A copy of your Form 3 or Form 4

Notice:

DO NOT SHIP THE SUPPRESSOR FOR REPAIR WITHOUT FIRST COMPLETING THE FORM AND RECEIVING A CONFIRMED RMA NUMBER. DO NOT SHIP IN ANY EVENT WITHOUT A COPY OF THE APPROVED BATF FORM.

When you ship the suppressor back to the manufacturer, please include a printed copy of the completed RMA form.

If for any reason your suppressor is not eligible for repair or replacement, you may purchase a replacement suppressor for 50% off the MSRP for the same or similar suppressor. Please contact our Customer Service Department for further details and requirements.

Contact Details:

Telephone: (844) 293-6778.

Disclaimer: Manufacturer’s warranty is subject to change without prior notice.

Questions & Answers

Don't see the answer
you're looking for?

Loading questions...