Black Friday Starts NOW! | Shop Black Friday

Dead Air Armament Keymount Flash Hider – .308 Win/7.62mm – 5/8×24

SKU: DA302

Out of Stock
Orders will Ship within 1 Business Day
Backed by the Dead Air Warranty!
TOP ADD-ON'S
Armorer's Wrench for AR-15 & Multi-Function Tool by AT3™

Armorer’s Wrench for AR-15 & Multi-Fuction Tool by AT3™

$16.99
Birchwood Casey Shoot-N-C Target - Round Bullseye - 12" - 5 Targets

Birchwood Casey Shoot-N-C Target - Round Bullseye - 12" - 5 Targets

$9.99

Long-Awaited Flash Hider Mount For Sandman’s Series Of Suppressors

The Dead Air Armament Keymount Flash Hider is the long-awaited flash hider mount for Sandman’s series of suppressors and has a unique patent-pending design that features a mass shifted equal length tines.

This flash hider offers great function in concealing the operator’s location and incredibly removed the “ping” when used with Dead Air suppressors.

Great For Low Light Conditions

The Dead Air Armament Keymount Flash Hider is not only beneficial in low light conditions, but the closed-bottom reduces muzzle rise.  This gives the muzzle device properties of a break, without the added concussion when shooting unsuppressed.

It is compatible with the Sandman-L™, Sandman-S™, Sandman-K™, and Key-Mo equipped Nomad-30 suppressors and backed by a lifetime warranty.

Specifications:

  • Threads per Inch: 5/8×24
  • Length: 2.7 in
  • Weight: 3.6 oz
  • Compatible with the Sandman-L, Sandman-S, Sandman-K, and Key-Mo equipped Nomad-30 suppressors
  • Backed by a lifetime warranty

NOTES:

  • Shims are no longer included by the manufacturer and may be necessary for proper installation.
  • Flash hider bores are sized to the thread pitch. (Ex: 1/2×28 is bored to .224 to meet the 5.56 requirement. 5/8×24 is bored to .30 cal.)

The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.

If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.

Dead Air Armament Warranty

We provide a lifetime warranty against all manufacturing defects and damages caused by the normal use of this product. The manufacturer will repair or replace free of charge any suppressor manufactured by, or at the direction of, Sound Moderation Technologies. The product is sold “as is” with no further implied contractual rights or warranties beyond those expressly stated herein.

The warranty does not apply to certain conditions or acts. It is at the sole discretion and determination of Sound Moderation Technologies if a particular defect or condition is covered by this warranty.

Conditions not covered include, but are not limited to: modifications, abuse, neglect, use of defective ammunition, use of improperly sized ammunition, and criminal conduct.

Sound Moderation Technologies assumes no liability for damages or bodily injury caused by such acts or omissions as previously described. Abuse and neglect are defined as usage outside of the reasonable scope for which the product is intended, thus contributing to the accelerated and unreasonable premature wear of the suppressor itself.

To submit a warranty claim please submit the online form here and have the below ready

• Your Product In-hand
• A photo of your ID
• A copy of your Form 3 or Form 4

Notice:

DO NOT SHIP THE SUPPRESSOR FOR REPAIR WITHOUT FIRST COMPLETING THE FORM AND RECEIVING A CONFIRMED RMA NUMBER. DO NOT SHIP IN ANY EVENT WITHOUT A COPY OF THE APPROVED BATF FORM.

When you ship the suppressor back to the manufacturer, please include a printed copy of the completed RMA form.

If for any reason your suppressor is not eligible for repair or replacement, you may purchase a replacement suppressor for 50% off the MSRP for the same or similar suppressor. Please contact our Customer Service Department for further details and requirements.

Contact Details:

Telephone: (844) 293-6778.

Disclaimer: Manufacturer’s warranty is subject to change without prior notice.

Customer Reviews

Based on 4 reviews
50%
(2)
50%
(2)
0%
(0)
0%
(0)
0%
(0)
M
Michael Price
Question

Will this work on a 5/8x24 300 blackout

H
Heath Hartshorne
Good

Perfect everything!

Thanks for sharing your feedback! We're glad you're satisfied with your purchase.

B
Bryan E
DeadAir Flash hider

Excellent customer service, fast shipping and great pricing for this hard to find DeadAir .30 cal flash hider. Looks great on my 10.5” .308

Thanks for sharing your feedback! We're glad you're satisfied with your purchase.

G
Geoege Remington
Awesome product

Awesome product looks great on my Delphi DP10

Questions & Answers

Don't see the answer
you're looking for?

Loading questions...