Year-End Blowout Sale | Up to 30% Off! Shop Now

EGW Trijicon RMR and Holosun 407C/507C Optic Plate Red Dot Mount for Various Handguns

Out of Stock
TOP ADD-ON'S

Holosun 507C X2 Red Dot Sight with Solar Backup for Pistols - Red

$278.99

Trijicon RMR and Holosun 407C/507C Optic Plate Red Dot Mount for Various Handguns

The EGW RMR Optic Plate Red Dot Mount makes it possible to attach a red dot sight that uses the Trijicon RMR footprint to your optics-ready handgun of choice, even on micro and subcompacts like the Springfield Hellcat and Sig Sauer P365. Made from high-strength 7075 aluminum, which is known to be used in aerospace and military applications for its durability and resistance to wear and tear.

The matte black hard coat anodized finish on the mount adapter provides an additional layer of protection against scratches, scuffs, and other types of damage. This finish is designed to withstand the harsh conditions that firearms are exposed to, such as extreme temperatures, moisture, and impact.

The compact size of this mount allows it to fit seamlessly onto your firearm, without adding any unnecessary bulk or weight. This is particularly important for firearms that need to remain lightweight and concealable, for use in both competitive shooting and everyday carry.

Easy to install and use, the EGW RMR Optic Plate Red Dot Mount is compatible with most commonly used handguns and a wide variety of micro red dots. Expand your handgun’s accuracy and capability with this adapter.

Includes

  • (2) 6-32 Flat Head Screws
  • (2) M4-0.7 x 8mm Flat Head Cap Screws
  • 2 Flat Head Cap Screws – Provided for Trijicon RMR

Compatibility

  • Trijicon RMR / SRO (Trijicon recommends the use of a sealing plate to prevent water from entering the RMR)
  • Holosun HE407C / HE407C X2 / HE507C / HE507C X2 / HS407C / HS407C X2 / HS507C / HS507C X2
  • Swampfox Kingslayer / Liberty / Justice
  • Ameriglo Haven

Installation

  1. Remove the original optic plate or optic, on some models it may be necessary to remove the rear sight
  2. Install the EGW Sight Mount into the empty plate slot
  3. Tighten set screw (if applicable)
  4. Place the red dot sight on the EGW Sight Mount (Placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
  5. Apply blue Loctite to the provided mounting screws
  6. Torque mounting screws to 15in/lbs

Make sure to follow these instructions carefully. Modification of your firearm may nullify the manufacturer’s warranty. We recommend that this product be installed and checked by a qualified gunsmith.

Specifications

  • Brand: EGW
  • Model: RMR Optic Plate Red Dot Mount
  • MPN: 49500, 49549, and 49548
  • Fit: Sig P320, Sig P365, and Springfield Hellcat
  • Material: 7075 Aluminum
  • Finish: Hard Coat Anodized

Products available on this page:

Questions & Answers

Don't see the answer
you're looking for?

Loading questions...