Angstadt Arms 1045 Stripped Lower Receiver – Accepts 10mm & 45ACP Glock Magazines

SKU: AA1045LRBA

Out of Stock

Join the waitlist to be emailed when this product becomes available

This item is regulated, therefore your entire order will be shipped to an FFL dealer of your choosing. After you place your order, we will contact you to finalize these details.

We'll special order for you! Allow 3-5 days to Ship
Backed by the Angstadt Arms Warranty!
TOP ADD-ON'S
ETS Glock 10mm Magazine - 30 Rounds - Clear - AT3 Tactical

ETS Glock 10mm Magazine - 30 Rounds - Clear

$21.95
AT3™ Enhanced Lower Parts Kit with Nickel Teflon Trigger and Magpul MOE Grip

AT3™ Enhanced Lower Parts Kit with Nickel Teflon Trigger and Magpul MOE Grip

$84.99

Solid & Reliable Stripped Lower Receiver For Your Next 10mm Pistol Caliber Build

The Angstadt Arms 1045 Stripped Lower Receiver is an outstanding option to start your pistol caliber build AR-15 from the ground up. It has a slick and solid design, built specifically for 10mm and .45 ACP builds, utilizing Glock pattern double-stack magazines.

The 1045 Lower Receiver features standard AR-15 controls for easy installation and is designed to fit most aftermarket Mil-Spec components.

Durable Construction & Outstanding Finish

The Angstadt Arms 1045 Stripped Lower Receiver is machined from a solid block of 7075-T6 billet aluminum with a matte black hard-coat anodized finish for extreme wear and corrosion resistance. It has a threaded bolt catch screw and an oversized integrated trigger guard that provides smooth operation at all times.

The receiver also features a flared magazine well and a “last-round bolt hold-open” that locks the bolt open on an empty magazine to aid in reloads.

Features:

  • Last round bolt hold open on an empty magazine (LRBHO)
  • Flared magwell for faster reloads
  • Accepts 10mm and 45 ACP Glock magazines
  • Integrated, oversized trigger guard
  • Machined from 7075-T6 billet aluminum with a matte black hard-coat anodized finish
  • Requires upper receiver with an oversized ejection port for proper ejection
  • Threaded bolt catch screw
  • For use with a 45 ACP bolt carrier assembly and a standard AR-15 hammer
  • Lower weight: 10.8 oz
  • Patent pending
  • Accepts aftermarket Glock pattern 10mm and 45 ACP double stack magazines

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

Specifications:

CaliberMulti
FitAR-15
Receiver Material7075-T6 Aluminum
Firearm TypeLower Receiver
ActionSemi-Automatic
Weight10.8 ounces

Angstadt Arms Warranty Information

Subject to terms, conditions, and limitations outlined below, Angstadt Arms, LLC products are warranted against defects in material and workmanship.

  • This warranty is valid only for products purchased and used in the United States of America.
  • Defective items will be repaired or replaced (with the same or comparable quality model) at our discretion.
  • Damage caused by neglect, abuse, misuse, alteration of the product, corrosion, fully automatic use, normal wear and tear, unreasonable use, or use of reloaded or other nonstandard ammunition is not covered by the warranty.
  • This warranty does not apply to normal wear of any parts, including metal, wood, plastic, rubber, and other materials surface finish.
  • Altering or modifying parts is dangerous and voids the warranty.
  • In the event of a warranty repair, please complete a support ticket to speak with a company representative before shipping your firearm for service.

Disclaimer: Manufacturer’s warranty is subject to change without prior notice.

Questions & Answers

Don't see the answer
you're looking for?

Loading questions...